Solutions to Paper Jam Problem in Brother® MFC Printer
What are the various tips to fix the issue of paper jam in Brother MFC printer?
Users find paper jams in Brother Multi Function Printers. If any such problem occurs, first identify whether it occurred due to fuser complaint, paper tray, or due to connection problems. If you find out the reason, you can easily fix it. Many problems would arise due to paper jams. If paper is not feeded automatically, it would give rise to improper printing. If paper gets stuck in your MFC printer, it would show this type of printing defects. Paper jams can also be caused due to cartridge problem. If the paper jams occur frequently and you cannot get proper printing after cleaning, find out whether it was because of fuser complaint. If it so, you have to buy a new one.
Causes for paper jams in Brother MFC Printers are given below:
- Dust or debris
- Rotating drum problem
- Toner or fuser complaint
Dust or debris
One of the main causes for paper jams is the presence of dirt, dust, or debris in your toner cartridge. The paper coming into the cartridge would get stuck. So clean your printer regularly. Remove the dust from the printer. Also find out whether any jams occurred in the sensor hole in the upper part of the rotating drum. Do not touch the roller while cleaning. If the oil in your body gets into the roller, the printing media cannot roll over it properly and you can’t get rid of the printer problem.
Rotating drum problem
If there is no direct symptom of paper jam and still you cannot do printing properly, find whether it is because of drum problem. If the paper gets into the end gear of the rotating drum and gets stuck there, you cannot access the printing function. Switch off your printer and check the plastic arms of the printer drum. If there is any paper piece jammed in any of the arms, you can’t continue printing. Here also cleaning is the best method to solve the problem. While cleaning, check the arms of the rotating drum.
Toner or fuser complaint
Toner complaint may also cause paper jams. It can be solved only by replacing it. When you switch on the loop back plug in, two flash lights appear; then it indicates paper jam. The oil spillage in toner can cause this problem. If the toner cartridge is not functioning properly, the same problem would be the result. The diodes or transistors in the fuser unit of the Multi Function Printer may get damaged and this can lead to fuser complaints. To solve this problem, you should replace it.
iYogi is a leading provider of online subscription-based technical support services offered directly to consumers and small businesses across a wide range of computing and communications devices and software. With a pool of thousands of tech experts, the company offers its services primarily through long-term unlimited service subscription plans of 1 to 3 years, on a 24/7 basis 365 days a year. Our Annual Subscription covers the following services:
- Comprehensive support for Solutions to Paper Jam Problem in Brother® MFC Printer.
- Diagnostic & repair for your technologies.
- Troubleshoot software errors.
- Update drivers and security to protect against online threats.
- Connect to Internet, devices and peripherals.
- Optimize your computer’s speed and performance.
Unlimited access to wide range of service offerings, all year around! iYogi’s resolution rates are amongst the highest in the technical support industry.
Call toll free 1 877 889 6859