HP Printer not Printing
The HP printer may print incomplete characters. This issue occurs due to clogging of print heads. So this problem can be solved by cleaning or replacing the print heads. Sometimes the printer will not accept the paper tray. At that time, you have to turn off your printer and disconnect the printer from its power source and reconnect the power and then turn the printer on. The printed pages will sometimes come out skewed, this may be due to curled or torn paper become jammed inside the printer. One easy remedy for this problem is that, you have to remove the torn pages from the paper tray and smooth down all the curled edges of the paper. If the settings of the printer are not correct or the paper tray is overloaded, the printer may pick multiple pages for printing, which could result in paper jam.
- Not printing black ink
- Paper Jam
- Ink or toner cartridges
Not printing black ink
One of the main printing problems is that, the HP printer will not print black ink. At that time, you think that black ink is low and needs a new replacement. So you have to clean the black ink cartridge. Then you have to remove the black ink cartridge from the HP printer, you can use a cotton swab to clean the laser or scanner block. You have to wipe out the dirt or any dried ink that may prevent ink from flowing. You can also try cleaning printer heads.
If your printer’s problem is paper jam, you have to make sure that your paper tray is not empty, nearly empty or fully jammed. All of these conditions might cause printer problems since it will not operate the paper feeding mechanism. You have to check whether the correct paper size is in the paper tray. You can check your printer manual for the correct range of thickness and paper size. If you print in a humid environment, it would affect your printers paper movement. This will result in paper jam. So you have to remove the paper manually before printer can print again. You have to pull the paper in the direction of the paper path. If you pull the paper backwards, your printer might be damaged.
You have to check the ink cartridge or toner cartridge is empty or not. Ink cartridge or toner cartridge related printer problems should normally be detected by the printer and shows blinking light or non green light. If the ink is over, you have to exchange the empty cartridge with the new one.
iYogi is the fastest growing online and remote tech support provider in the direct-to-consumers and small businesses sector. Our highly skilled and experienced tech experts available, 24×7×365 will provide the best issue resolution and customer satisfaction.
- Comprehensive support for HP printer not printing
- Diagnostic & repair for your technologies
- Troubleshoot software errors
- Update drivers and security to protect against online threats
- Connect to Internet, devices and peripherals
- Optimize your computer’s speed and performance