Kodak® Printer not Detected Issue
Are you aware of the causes and tips to fix Kodak printer not detected issue?
Kodak printers provide amazing print quality and fast results. If the driver is installed properly, it gives good performance and good quality. Many of the errors with printers are caused due to the connection issues, presence of viruses or corrupted drivers. Most of the problems can be resolved quickly by power cycling the printer. You need to turn off the printer and wait for five seconds and turn on the printer again. If you are using USB cable, first make sure that it is 2.0 high speed cable and it is connected to both your printer and computer. If the USB has been disconnected from the printer, just restart the computer and reconnect it. The firewall allows the services needed for your printer. If you are updating the drivers properly, then most of the issues can be resolved.
The following are the some of the details of Kodak printer not detected issue:
- Printer not detected
- USB to Wi-Fi
- USB to Ethernet
Printer not detected
For resolving this issue, make sure that you are using the power code that came with the printer and check whether power code is connected to the AC adapter and is plugged into an outlet or power strip. If the power to the printer gets interrupted, then restart the computer and the printer. After that, make sure that you are using 2.0 cables and check the USB cable is connected to both your printer and computer.
USB to Wi-Fi
For USB connection, first you have to disconnect the printer from the computer and use the Control Panel to delete the printer and then configure the wireless connection. After that, you need to select the menu and navigate the network settings and view network configuration and conform the IP address. Run the set-up utility and install the driver. After the installation, you have to click 'Done'.
For converting the USB connection into Ethernet connection, first you have to disconnect the printer from the computer. After that, use the Control Panel and delete the printer and then connect printer to the network with an Ethernet cable. After that, you need to run the set-up utility and install the driver completely and click 'Done'.
iYogi is the fastest growing online and remote tech support provider in the direct-to-consumers and small businesses sector. Our highly skilled and experienced tech experts available, 24x7x365 will provide the best issue resolution and customer satisfaction. Our award winning and low priced Annual Subscription covers the following services:
- Comprehensive support for fixing Kodak printer not detected issue
- Diagnostic & repair for your technologies.
- Troubleshoot software errors.
- Update drivers and security to protect against online threats.
- Connect to Internet, devices and peripherals.
- Optimize your computer’s speed and performance.
Unlimited access to great tech support, all year around! We promise the lowest wait-time and highest resolution rate in the industry.
Call toll free 1 877 889 6859