Error Codes in Xerox® WorkCentre printer
What are the causes of error codes in in Xerox WorkCentre multifunction printer?
Error codes may occur in printers due to any unexpected conditions. Xerox WorkCentre multifunction printer error codes will occur due to several reasons. The Fault Code 116-331 will occurs in the printer due to invalid log information. So, you have to switch off the printer and then turn on. Almost all the error problems will be solved when the printer is turned on and off. It will show error codes if the device could not connect to the SMTP server, DNS address error, FTP service problem etc. If the error occurs, the device will not print or work. It will always show error messages.
Points below give more information and tips to fix the errors in Xerox WorkCentre multifunction printer:
- Fault Code 024-913: Tray 4 Size Mismatch
- Fault Code 072-101: Tray 2 Misfeed Jam
- Fault Code 016-784: Server Write Error
Fault Code 024-913: Tray 4 Size Mismatch
If this error occurs, you have to check the paper behind the paper tray. For that, you have to open the paper tray and grasp the sides of the tray. Then, you have to pull the front part, to take the tray out of the machine. You have to check the slot in the tray. If paper or anything stuck in it, then you have to remove it and you have to reinstall the paper tray. Then, turn off and turn on your device. Then, you have to pull out the paper tray and load the paper against the left hand side of it. Now set the device to detect the paper automatically or manually. You have to specify the required size. If you change the type of paper, then you have to change it on the Control Panel also. The process will recover your error.
Fault Code 072-101: Tray 2 Misfeed Jam
To recover this error, first you have to turn off and turn on the device. Then you have to load the paper trays. After loading, you have to replace the paper tray 1 or 2 with paper feed rollers. For replacing, you have to pull any one of the paper tray out fully. You have to pull the tray out of the device. Then, you can see three feed rollers. You have to pull the white paper guide which is in the front of feed rollers and remove each roller. Then, you have to install the new feed rollers. Then, you have to re install the paper tray.
If this error occurs, you have to switch off and switch on the power of the device. You will have to make sure that you have access permissions on the server. There must be enough space in the directory on the server. You can also contact the network administrator if necessary.
iYogi is the fastest growing online and remote tech support provider in the direct-to-consumers and small businesses sector. Our highly skilled and experienced tech experts available, 24x7x365 will provide the best issue resolution and customer satisfaction. Our award winning and low priced Annual Subscription covers the following services:
- Comprehensive support for error messages in Xerox WorkCentre multifunction printer
- Diagnostic & repair for your technologies.
- Troubleshoot software errors.
- Update drivers and security to protect against online threats.
- Connect to Internet, devices and peripherals.
- Optimize your computer’s speed and performance.
Unlimited access to great tech support, all year around! We promise the lowest wait-time and highest resolution rate in the industry.
Call toll free 1 877 889 6859