Reset LaserJet Printer
A laserjet printer is one of the common types of system printer. Top quality printing of graphics and images are obtained from such printer. The scanning of laser beam which is across the photoreceptor of the printer would produce the images. A laser beam would be there and it would project the image present on the paper into an electrically charged drum. That drum is being coated with selenium or other organic conductors. The charges present in the areas exposed to light would be removed. The dry ink particles that are present are picked up by charged areas on drum. Then, this drum would print image in the paper by the direct contact and heat. The resetting of the laserjet printer would solve some issues with the printer since it brings that to the default settings.
- Need to reset a laserjet printer
- Resetting the printer
- Things to remember
Need to reset a laserjet printer
By resetting of the laserjet printer, you could be able to keep the printer to its default settings. There are conditions in which the printer could not be able to perform well. There might be issues with the printer stalling or stopping. In such situations, the resetting of printer would solve many issues. This would solve the problems with performance of the printer and then allow the printer to get reprogrammed. If the settings present in the printer would not accomplish the printing, resetting would help you.
Resetting the printer
Firstly, you have to power off the printer. Then, you have to remove the power cord. After that, you need to put the power plug back again and then have to power on the printer. You need to hold the Go and the Cancel buttons for some time. You have to then wait for the lights in the printer would appear. Then, you need to release the Go and the Cancel buttons.
The resetting of the printer would remove all the settings that you have configured. In the case of network printer, if you reset the printer that would cause all connection settings and the configuration would be lost. It is seen the IP address that you have configured would also be lost, if you have installed the JetDirect card. So, it would be better to remove that card whenever you are going to reset the printer. You have to set up all the custom settings again. So, you need to have idea about what all custom settings have to be done after the reset.
iYogi is the fastest growing online and remote tech support provider in the direct-to-consumers and small businesses sector. Our highly skilled and experienced tech experts available, 24x7x365 will provide the best issue resolution and customer satisfaction. Our award winning and low priced Annual Subscription covers the following services:
- Comprehensive support for tips to reset the laserjet printer
- Diagnostic & repair for your technologies.
- Troubleshoot software errors.
- Update drivers and security to protect against online threats.
- Connect to Internet, devices and peripherals.
- Optimize your computer’s speed and performance.